Kawasaki Winch Mount Installation Manual

download
1. You will need to remove the lower Front Moulding of the ATV for installation of the Winch Kit. 2. Position the Winch with the motor on the LEFT side in the mounting location and slide the Winch Mount Plate in under the winch. Attach the Winch Mount Plate to the frame with the U-bolts and Nylock Nuts provided. Tighten at this time. See Picture Winch Mount Plate 3. Install the Roller Hawse Bracket to the Lower Winch Plate and to the front bars (behind the bars) of the ATV using the U-bolts, Carriage Bolts and Nylock Nuts. See Picture Below. Winch Mount Plate Roller Hawse Bracket 4 4. After winch installation is complete, reinstall lower Front Moulding of ATV. Remove one of the long rollers and the two side rollers and feed the winch cable through the roller hawse. Reinstall the rollers and be sure rollers move freely. Attach the Roller Hawse to the Roller Hawse Mount Plate using the 3/8″ x 1″ Bolts and Nylock Nuts provided with the winch. Tighten all hardware

Incoming search terms:

• attaching winch plate to mule rear roll over bar
• Badland Winch Installation 2005 kawasaki 700 Prairie
• How to install an badland electric winch on a Kawasaki Prairie 700
• Kawasaki Mule 2510 Winch Mounting Bracket
• kawasaki prairie 700 winch install
• kawasaki prairie winch mounting plate